Configuring the Insight Teacher for Insight Connector

The Insight Connector's IP Address, Hostname, or FQDN can be configured during the installation of Insight on the Teacher's computer as shown below.

Configuring the Connector During Installation

Update the Connector Settings

If, after installation, the connection to the Insight Connector needs to be changed, it can be updated in the Settings dialog of the Teacher console.

  1. Click the Settings icon.

  2. Click Administrator Settings.

  3. Enter the Administrator password in the box provided.

  4. Click Verify.

  5. Select the Use Insight Connector box to enable it.

  6. Enter the IP Address, Hostname, or FQDN for the computer running the Insight Connector.

  7. Click Save.

Last updated

Was this helpful?