# Reboot Required for Installing Faronics Remote

Once you have the agent installed, apply the "Faronics Remote Default" policy to the machine(s) when you’re ready to install the remote access component.&#x20;

1.  Navigate to the ‘Computers’ page along the top menu bar:

    <div align="left"><figure><img src="https://3727707013-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrU8a8n061VQ2evs6aMjn%2Fuploads%2FrMgL9nZ5iF6739BC6c4G%2FComputers%20Page.png?alt=media&#x26;token=6bf12bec-15c5-4b09-98c2-efb3e04fb31f" alt=""><figcaption></figcaption></figure></div>
2.  Select the machine(s) to apply the ‘Faronics Remote Default’ policy to:

    <div align="left"><figure><img src="https://3727707013-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrU8a8n061VQ2evs6aMjn%2Fuploads%2F73vMOEsHaAJuxNmV6mPm%2FSelect%20Machines.png?alt=media&#x26;token=556bb67e-7207-4b7f-b0c2-809c62c49cd1" alt=""><figcaption></figcaption></figure></div>
3. Under the ‘Assign Policy’ drop-down menu, select the ‘Faronics Remote Default’ policy.
4.  You'll have an option to apply the policy the next time the computer checks-in (usually within a minute), or schedule this to occur later on if the machine is potentially in use. This step will require a reboot to complete. \


    <div align="left"><figure><img src="https://3727707013-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrU8a8n061VQ2evs6aMjn%2Fuploads%2Fn9n45NJ7Lit77C0xtDsR%2FPolicy%20Update%20Preference.png?alt=media&#x26;token=7b0d0a91-a21f-4647-b9d5-d86cd0dbe2ba" alt="" width="563"><figcaption></figcaption></figure></div>

